EMC M22 Brass Cable Gland With Shielding Function Approved By U/L
CE ROSH
Description
ITEM: EMC BRASS TYPE CABLE GLAND
MATERIAL: BRASS, NIKEL PLATE
PROTECTION: IP68
TEMPERATURE: STATIC: -40ºC -110ºC, SHORT TIME TO 120ºC
DYNAMIC: -20ºC~80ºC SHORT TIME TO 100ºC
FUNCTION: EMC CABLE GLAND IS DESIGNED FOR USE WITH UNARMOURED ELASTOMETRIC
AND PLASTIC CABLE OR BRAIDED CABLES WHERE EMC ISREQURIED. SUITABLE
FOR BOTH INDOOR&OUTDOOR APPLICATION. SEALS ON CABLE OUTER
SHEATH TO IP68, AND IF FITTED WITH PATENTEDEMC MEMBRANCE, SUITABLE
TO CARRY ON CABLE SHIELD. THE DESIGN OF OUR PRODUCT WITH A MUCH MORE WATERPROOF PERFORMANCE. WE
SAY "NO" TO THE LEAKAGE. THE SPECIAL DESIGN PROVIDES GOOD RESIST
TANCE TO WATER, DUST, ACIDS AND ALKALI AND SOLVENTS COMPARED TO
CONVENTIONAL EMUL EMULSION SYSTEMS
REMARK: WE CAN CUSTOMIZED AS CUSYOMES'REQUIREMENTS.
| Item | Range
(mm) | GL
Thread Length
(mm) | H
Joint Length
(mm) | Spanner size
(mm) | Code |
| M | PG | G | NPT |
| M12×1.5 | PG7 | G1/4 | NPT1/4 | 3-6.5 | 6.5 | 19 | 14 |
HX-EMC-"Item"W |
| 4-8 | 8 | 19 | 17/14 |
| M16×1.5 | PG9 | - | - | 3-6 | 8 | 20 | 18 |
| 4-8 | 8 | 20 | 18 |
| 5-10 | 8 | 21 | 20/18 |
| M18×1.5 | PG11 | G3/8 | NPT3/8 | 5-10 | 8 | 21 | 20 |
| M20×1.5 | PG13.5 | G1/2 | NPT1/2 | 6-12 | 8 | 22 | 22 |
| 10-14 | 8 | 23 | 24/22 |
| M22×1.5 | PG16 | - | - | 10-14 | 8 | 23 | 24 |
| M25×1.5 | PG21 | G3/4 | NPT3/4 | 10-14 | 9 | 25 | 24/27 |
| 12-16 | 9 | 27 | 27 |
| 13-18 | 9 | 27 | 30/27 |
| M32×1.5 | PG29 | G1 | NPT1 | 15-22 | 10 | 29 | 35 |
| 18-25 | 10 | 31 | 40/35 |
| M40×1.5 | PG36 | G1-1/4 | NPT1-1/4 | 18-25 | 11 | 31 | 40/45 |
| 22-30 | 11 | 35 | 45 |
| 25-33 | 11 | 37 | 50/45 |
| M50×1.5 | PG42 | G1-1/2 | NPT1-1/2 | 32-38 | 13 | 37 | 57/55 |
| M63×1.5 | PG48 | G2 | NPT2 | 37-44 | 14 | 38 | 64/68 |
| 42-52 | 14 | 38 | 78/68 |
| M72×2 | - | - | - | 42-52 | 16 | 42 | 78 |
| M80×2 | - | - | - | 55-62 | 18 | 45 | 88 |
Usage
Metal waterproof cable gland is a cable accessories product.
Connectors can be used to lock cables, the other end can be
connected to the device box, or according to the choice of threads
can be connected to electrical equipment with threads in and out.
Product Features
This product is a metal cable specially designed for the fixed end
as an end body. When the isolation cable enters the fixed end, the
copper contact strip attached to the fixed head can be used to
contact the metal isolation network in the cable, and then the
interference electromagnetic wave is guided to the ground line, so
that the electromagnetic interference source can be evacuated. The
copper fixture head is fully compatible in all areas where magnetic
wave protection is required and is available in waterproof IP68 and
fixed tension.
Our Service
We welcome customers to provide us with advice on our products.
Any questions can be notified by email or phone and we will handle
it for you in a timely manner.
Fast and accurate delivery
We guarantee the quality of our products.
Products can be customized according to specific requirements.
FAQ
Q: Are you trading company or manufacturer?
A: We are the factory. Also we can export the goods by ourselves.
Q: How long is your delivery time?
A: Generally we can send out the the goods within 3-7 days if the
goods are in stock.Or it is should be 7-30 days if the goods are
not in stock, it is according to your order quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the samples for free charge but do not pay
the cost of freight.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance,balance before shipment.
Q: How about the after-sale service?
A: Any feedback or comments are welcomed.We will try to make the
best assistant to let you maximum satisfaction.
