PG21 Fire Proof Customized Stainless Steel Cable Glands For 13 -
18mm Cable Wire
Product Descrption of the cable gland
| Thread | PG (Metric,G,and NPT thread please feel free to contact me) |
| Materials | With nickel plated for A.C.F parts,ULapproved Nylon
PA66(Flammability UL 94V-2) for E parts, EPDM rubber for B.D parts,
(Accept to make super rubber: resist high temperature rubber,
resist strong acid/alkali,etc).
|
| Protection degree | IP68 |
| Working temperature | -40℃ to 100℃ |
| Features | The claws and seals of excellent design, sealing nut have a "click"
sound and re-open, can hold cable firmly and have a wider cable
range. Resistant to salt water,weak acid, alcohol, oil, grease and
common solvency. |
| Thread | Range | GL | Mountinghole | H | Spanner size | Code |
| PG7 | 3-6.5 | 7 | 12.5 | 19.0 | 14/15 | HX-SSPG7 |
| PG9 | 4-8 | 8 | 15.2 | 20.0 | 17/18 | HX-SSPG9 |
| PG11 | 5-10 | 8 | 18.6 | 21.0 | 20/21 | HX-SSPG11 |
| PG13.5 | 6-12 | 8 | 20.4 | 22.0 | 22/23 | HX-SSPG13.5 |
| PG16 | 10-14 | 8 | 22.5 | 23.0 | 24/25 | HX-SSPG16 |
| PG21 | 13-18 | 9 | 28.3 | 27.0 | 30 | HX-SSPG21 |
| PG29 | 18-25 | 10 | 37.0 | 31.0 | 40 | HX-SSPG29 |
| PG36 | 25-33 | 11 | 47.0 | 37.0 | 50 | HX-SSPG36 |
| PG42 | 32-38 | 13 | 54.0 | 38.0 | 60 | HX-SSPG42 |
| PG48 | 37-44 | 14 | 59.3 | 38.0 | 65 | HX-SSPG48 |
| PG63 | 42-52 | 16 | 72.0 | 42.0 | 76/80 | HX-SSPG63 |
Installation attention
Conductor-to-conductor connections require low resistance and
sufficient mechanical strength, and sharp angles cannot be found at
the junctions. Connection of conductors for medium and low voltage
cables is usually pressed.
(1) Choose suitable conductors and connecting pipes with electrical
conductivity and mechanical strength;
(2) The gap between the inner diameter of the pressure pipeline and
the outer diameter of the connecting core is 0.8-1.4 mm.
(3) The resistance of the joints after bonding shall not be higher
than 1.2 times that of the conductors with equal cross-section, and
the tensile strength of the joints of copper conductors shall not
be lower than 60N/mm2.
(4) Before pressing, the inner surface of the connecting pipe is
coated with conductive adhesive, and the oxide film is destroyed by
wire brush.
(5) The sharp corners and burrs connecting pipes and wires shall be
polished with a file or sandpaper.
FAQ
Q: Are you trading company or manufacturer?
A: We are the factory. Also we can export the goods by ourselves.
Q: How long is your delivery time?
A: Generally we can send out the the goods within 3-7 days if the
goods are in stock.
Or it is should be 7-30 days if the goods are not in stock, it is
according to your order quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the samples for free charge but do not pay
the cost of freight.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance,
balance before shipment.
Q: How about the after-sale service?
A: Any feedback or comments are welcomed.
We will try to make the best assistant to let you maximum
satisfaction.
