Waterproof NPT1 SS316 Stainless Steel Cable Gland In Wire Accessores

• Product details:

Our stainless steel products are highly selective and accurate.

The outer parts are made of SS304/SS316, the inner core is nylon PA66, and the sealing parts are made of NBR and silicone rubber.

In order to ensure the accuracy of products, advanced precision CNC lathes are adopted. On the road to creating good quality, we can not be ambiguous.

In the right way of use, our products can achieve:

Working temperature: Static environment is - 40 100 in a short time, 120 in a short time, dynamic environment is 20 80 in a short time, 100 in a short time.

Our products are certified by CE, RoHS and REACH. They are corrosion resistant and rusty.

It is an environmental protection product, does not release harmful substances, does not pollute the environment.

We guarantee the quality of our products. You can tell us anything by email or telephone. We'll deal with it in time.

• Product certification:

European CE, ROHS,REACH certification

1. precision thread, tightly connected
2. seal rubber ring, effective seal
3. protection degree up to IP68

Special clamping claws and clamping rings are sealed and fastened together with the tightening nut, thus clamping the cable in a large range.Strong tensile strength, waterproof, dustproof, salt - resistant, acid and alkali - resistant, alcohol, oil, ester and other common solvents. Application occasions: offshore operations, mine machinery, chemical equipment and other harsh working occasions.

• Installation attention

conductor connection conductor connection requires low resistance and sufficient mechanical strength, and no sharp corners can be found at the junction. The middle and low voltage cable conductor connection is usually pressed.

(1) choose suitable conductor and connecting tube with electrical conductivity and mechanical strength;

(2) the gap between the inner diameter of the pressure pipe and the outer diameter of the connecting core is 0.8~1.4mm.

(3) the resistance value of the joint after crimping shall not be 1.2 times higher than that of the equal section conductor, and the tensile strength of the copper conductor joint shall not be less than 60N/mm2;

(4) before crimping, the outer surface of the conductor is coated with conductive adhesive on the inner surface of the connecting pipe, and the oxide film is destroyed by a wire brush.

(5) sharp corners and burrs on connecting pipes and conductor conductors, smoothing with files or sandpaper.

• Characteristics

1) strong antioxidation, no rust

2) do not release harmful substances, pollution-free

3) the use of stainless steel, high hardness

4) the grade of waterproof is IP68

5) a temperature of 120 degrees Celsius in a short period of time in a static environment.

6) product performance: waterproof, dust-proof, corrosion resistant and non polluting. It has the characteristics of strong anti stamping, isolation and explosion-proof.

The products are suitable for cable connection of circuit, electric box and transportation equipment, industrial machinery and equipment, wind energy industry, solar energy industry and so on.

The installation is very simple. Just insert the cable through the assembled gland and tighten the compression nut until the cable is fixed.

Yueqing Hongxiang Connector Manufacturer Co.，Ltd was founded in 2006 with a registered capital of 5 million yuan. It is a high-tech company which integrating research and development, production and sales. There are more than 80 employees in the company and it is equipped with professional sales team and workshop management team.

The company is mainly aimed at the global sales of cable connectors and accessories for various materials. After more than ten years of development, it has provided thousands of customers with high-quality product experience . We always pursued the most cost-effective products.

The idea of company is “customer first : We solve the problems for customers in time ,due to the customer is the parents of food and clothing . Purse quality : only imperfect products, no critical customers. Be optimistic and positive : never give up when encountering difficulties and setbacks, and constantly motivation ourselves.” This mission is keeping improving the cable connector industry. We have established a good reputation in the industry and won the praise of all customers.

Since its establishment, the company has cooperated with many well-known enterprises, such as Yutong Bus, Xiangtan Electromechanical, PHILPS, OPPLE, ABB, etc. In 2011, we participated in the cooperation of China's first aircraft carrier “Liaoning”, and our high quality was recognized by country.

The company Firmly believes that product quality is the key to development. It is always implementing the national standard quality management system ISO9001, IATF16949. From now ,The company passed CE, ROHS, RECAH, TUV, ATEX, IP68 and other certifications.

The latest practical patent enables the product to achieve IP68 waterproof level. In order to sever our customers, we have specialized R&D teams to serve customers and professional testing centers for rigorous testing of products.